IMPRINT  |  DATA PROTECTION
DEUTSCH  |  ENGLISH  |  РУССКИЙ
DZ-NT
Printing inks for self-adhesive tapes

Plastic profiles


Printing inks for sausage casings
Solvent basic colour system on an ester base for flexografic and gravure printing
NT = regular concentrated pigments
For printing on plastic materials made of e.g. ABS, PP, PVC
For adhesive tapes made of PVC using an acrylic- or rubber-adhesive
For sausage casings made of PA, PES, collagen, cellulose [with or without PVDC coating]
Suitable for printing on shrink bags and lid films as well

●  Take care to use suitable, ester and ketone resistant printing plate material.
●  The suitability of photopolymeric plates has to be tested in advance
●  Good release on common acrylate- and rubber-adhesives
●  High gloss, optimized color strength and very good printing properties
●  Printec recommends the use of a corona-pretreatment of the substrate
●  Optimal drying at 30 °C and high air-flow
●  The water content of all solvents must be below 1%
●  Do not use alcohols, glycols or glycol-ethers
●  Free of harmful cyclohexanone

Printing auxiliaries:  curing agent [15-20 pt. for 100 pt. of colour], thinner, retarder, accelerator, quick dryer, diluent [depending on the printed material]
Corona [recommended]:  42-44 mN/m 
Delivery form:  10 kg / 25 kg hobbock or 100 kg / 200 kg steel drum




Basic colours:
Overprint varnishes matt or gloss, gold- and silver inks, customized shades are available as well.

PRINTEC basic colours
Examination of compliance for the colour series DZ-NT – For articles intend to come in contact with food according to international guidlines, regulations and standards.

The colour series DZ-NT is formulated according to CEPE guideline “Guide to Materials and Substances for Exclusion from Printing Inks and Related Products” and EC-Directive 2002/72/EC “Relating to plastic materials intended to come into contact with foodstuffs”.

Further technical information as well as safety data sheets for all our products are available upon request.


printec GmbH 

Auf dem Haderland 10, DE-99894 Friedrichroda, OT
Ernstroda, Germany         
+49 [0] 36 23 - 31 18 20  | 
printec@printec-gmbh.de
Copyright 2014-2017 
– All rights reserved.


 
 ISO 9001:2015
PRINTEC is DIN/EN ISO 9001/2008 certified
Other languages:  DEUTSCH  |  ENGLISH  |  РУССКИЙ