Thermoplastic profiles
100% solids acrylate system using a hybrid of radical and cationic UV-polymerization
Usable in flexoprinting with chambered blade systems or indirect roto-gravure

For printing on newly extruded or pre-treated plastic materials e.g. ABS, PP, PVC, PMMA

●  Printec recommends the use of a corona-pretreatment of the substrate
●  No solvent evaporation during printing, therefore no explosion hazard
●  Consistent printing because of the fixed binder to pigment ratio
●  [No colour change due to evaporating solvents in the ink trays]
●  Extremely low dot-gain – outstanding printing quality with line and halftone
●  High colour intensity with minimal ink quantities
●  Outstanding adhesion and scratch resistance on the substrate
●  High resistance to water and solvents
●  High resistance to foodstuffs, e. g. lactic acid, fats, curd, plant-oils

Corona [recommended]:  42-44 mN/m 
Delivery form:  10 kg / 25 kg hobbock or 100 kg / 200 kg steel drum

Basic colours:
Overprint varnishes matt or gloss, gold- and silver inks, customized shades are available as well.

PRINTEC basic colours
Further technical information as well as safety data sheets for all our products are available upon request.

printec GmbH 

Auf dem Haderland 10, DE-99894 Friedrichroda, OT
Ernstroda, Germany         
+49 [0] 36 23 - 31 18 20  |
Copyright 2014-2017 
– All rights reserved.

 ISO 9001:2015
PRINTEC is DIN/EN ISO 9001/2008 certified
Other languages:  DEUTSCH  |  ENGLISH  |  РУССКИЙ